The 4488 CORE Directional Headset Microphone combines DPA’s renowned 5 mm capsules with CORE by DPA technology and the Red Dot award-winning headset. These are the most advanced headsets – secure, durable and flexible – for segments including: Theatre, Broadcast, House of Worship and Conferencing
This product has multiple variants. The options may be chosen on the product page
DPA 6060 CORE submini omni-directional microphone, normal SPL
This product has multiple variants. The options may be chosen on the product page
DDPA 6061 CORE submini omni-directional microphone, loud SPL.
This product has multiple variants. The options may be chosen on the product page
DPA 6066 CORE Refine submini omni-directional headset microphone, MicroLock
This product has multiple variants. The options may be chosen on the product page
DPA DAD6021 Microdot to AT ATW‐T101 (U100), Lectrosonics UHF systems for (low level)
Adapter for Sennheiser Evolution/G2/G3/D1, X2 Digital Wireless, Audio Ltd En2 TX
DPA adapter: Shure PGX1 / SC1 / SLX1 / U1 / ULX1 / UR1 / UT1, TOA WM4300
DPA adapter: Sony UWP / DWZ / Freedom WRT805 series
DPA
Adapter for MicroDot/Microlock to 3-pin XLR with Belt Clip
This product has multiple variants. The options may be chosen on the product page
DPA
AIR1 is a unique windscreen for lavalier and headset mics with a patent-pending design that guarantees fast mounting, highly efficient and consistent wind protection, and unrivaled acoustic transparency. AIR1 fits on any round omnidirectional miniature mics between Ø2.5-5.8 mm (0.1-0.23 in). AIR1 ships with two windscreens of the same size and color in the box
This product has multiple variants. The options may be chosen on the product page
DPA microphone clip, 8-way, for 2061 lavalier
This product has multiple variants. The options may be chosen on the product page
Ultra-compact preamp with active drive for impedance balancing
DPA miniature grids, 5 pieces, high boost.
This product has multiple variants. The options may be chosen on the product page
MMP-GR Preamp with Modular Active MicroDot Cable for Pencil Microphone, 1.8 m (5.9 ft)
Compact Mic
DPA d:sign 4097 CORE micro shotgun microphone, MicroDot
The DPA 4017B Shotgun Microphone is a supercardioid shotgun mic designed for broadcast, location, production and studio applications.
Microphone Grid for 6060/6061/6066
This product has multiple variants. The options may be chosen on the product page
Subminiature Mesh for use with 6000 Series Subminiature Microphones used as lavaliers. Reduces slight wind noise from a speaker’s voice or any other turbulence, as e.g., breathing noise from mouth and nose
A white-painted, sturdy, stainless steel cap for subminiature microphones that can be painted and/or covered in makeup. Allows unlimited visual creativity when miking up talent for theatre productions
Compact Mic
DPA d:dicate super cardioid modular microphone, MMP-A preamp with MMC4018 capsule
Boom pole accessories
Easyrig Boom Rig lightweight and portable support for boom operators
Boom pole accessories
The counterweight for boom poles will reduce the strain on your guiding arm when using the Boom Rig.
Foam Windscreens for Headsets and Earsets with round capsule and our DPA Lavalier 4060 Series
This product has multiple variants. The options may be chosen on the product page
GLO-POTS are charged using an external light source. For best results, use an UV-emitting light source such as sunlight, an incandescent light or a blacklight Available for Sound Devices 633, 664, 688, 833, 888, Scorpio
This product has multiple variants. The options may be chosen on the product page
GLO-POTS are charged using an external light source. For best results, use an UV-emitting light source such as sunlight, an incandescent light or a blacklight Available for Sound Devices Mixpre3, Mixpre6, Mixpre10
This product has multiple variants. The options may be chosen on the product page
COGA SOUND
GLO-POTS are charged using an external light source. For best results, use an UV-emitting light source such as sunlight, an incandescent light or a blacklight Available for Zaxcom Nomad and Nova
This product has multiple variants. The options may be chosen on the product page
Boom pole accessories
The new Orca Hard Shell Boom Pole Cases features unique thermoforming technology and provides Ultimate protection for any boom pole. The cases include a well-padded interior and a detachable shoulder strap.
This product has multiple variants. The options may be chosen on the product page
HIPPO FILM SOLUTION
Hippo Skin is a pressure sensitive adhesive tape. The main characteristic of this product is that is super sticky and leaves no residue when removed. Hippo Skin has been mainly used in film and television sets around the world.
This product has multiple variants. The options may be chosen on the product page
Boom poles
K-Tek Avalon KE-89CC aluminium boom pole, 4 sections, 74-229cm, 624g, with internal coiled cable, bottom exit
Boom pole accessories
K-Tek Boom Cradle, compatible with Mighty Boom Poles, Avalon, Airo and most third party boompoles.
Boom poles
K-Tek indie KC-108 composite boom pole, 5 sections, 75-275cm, 544g
A professional 12' 3" (3.75m) graphite boompole featuring a 6-section rigid build, solder-free removable head, and side-exit XLR for elite on-set versatility.
A professional 16' 3" (4.95m) 6-section graphite boompole featuring a solder-free removable headpiece, internal RF-shielded coiled cable, and a side-exit XLR base for maximum rigidity and versatility on set.
A compact 9' 3" (2.85m) graphite boompole featuring a 6-section rigid design, solder-free removable head, and internal coiled cable with a side-exit XLR base.
Microphone Suspension; very versatile high tech suspension, using KSUS Suspenders:
- Suspenders are spaced 2″ (5 cm)
Boom poles
The ultimate graphite poles with removable heads for versatile cabling, sure-grip oval divets, hand-burnished for smoother moves & locking
This product has multiple variants. The options may be chosen on the product page
Audio cables
Ideal for facilitating on-site audio recording where cables need to be routed with limited space
This product has multiple variants. The options may be chosen on the product page
Boom poles
The K-Tek 6-Section Atriculated Boompole is a very lightweight, superbly engineered, and meticulously crafted 6 section boompole; made of a graphite fiber derivitive in a black matte finish.
This product has multiple variants. The options may be chosen on the product page
Boom pole accessories
The Boomshine Kit features K-Tek’s original secret formula for cleaning and polishing boompoles, including a 4 oz. bottle and two microfiber cloths to ensure professional equipment remains in peak condition throughout its life on set.
CONSUMABLES
Especially designed for sound recordists working outdoors, this Stingray Sunhat not only provides heat and sun protection but is a perfect fit with over-the-ear headphones or over-the-head hearing protection
This product has multiple variants. The options may be chosen on the product page
Single-hand operated, self-closing Lavalier pouches with a see-through back and dedicated label area. Designed for lavalier microphones also perfect for small items like adapters and accessories.
The Stingray Junior X is a compact, third-generation mixer bag optimized for mobility, featuring a rigid internal frame, a built-in kickstand, and a "trap door" for fast access, making it the ideal protective solution for recorders like the Sound Devices 833 or 633.
This product has multiple variants. The options may be chosen on the product page
The Stingray Large X is a third-generation, professional mixer bag featuring a reinforced internal frame, threaded accessory mounts, and broad compatibility for large recorders like the Sound Devices Scorpio or Zaxcom Nomad. Available in orange or purple, this all-in-one kit includes a kickstand, RF-shielded dividers, and a full weather protection system.
This product has multiple variants. The options may be chosen on the product page
The Stingray Small X is a high-performance, third-generation mixer bag designed for recorders like the Sound Devices 833/888, Zaxcom Maxx. featuring a reinforced frame, threaded accessory mounts, and a comprehensive all-weather protection kit in either orange or purple.
This product has multiple variants. The options may be chosen on the product page
Boom poles
The K-Tek KEG100 is a 9-foot graphite boompole designed for professional audio recording. Available in Bottom Exit (CC) or Side Exit (CCR) configurations, it features a 5-section high-density graphite build with an internal coiled cable for maximum rigidity and ease of use on set.
This product has multiple variants. The options may be chosen on the product page
Aluminum 4-point high-end Suspension f/ Shotgun Mics (19 mm - 21 mm dia) w/ KSUS Suspenders, spaced 3 1/5" (9 cm), weight: 0.22 lbs (99 g)
Charger
Lectrosonics IFBR1C charging station for 4x IFBR1C receivers, incl. power supply and European AC cord
LECTROSONICS
Lectrosonics DSR4 four channel digital slot-mount receiver, rear panel adapter not included
This product has multiple variants. The options may be chosen on the product page
Accessories
Lectrosonics rear panel adapter for DSR4 receiver, 2x TA5M audio ouput + HRS 4p power supply socket and USB-C for connection to Wireless Designer
Lectrosonics belt pack IFB receiver, incl. belt clip and 2x NiMH AA batteries, wideband block A1 470.100 - 537.575 MHz
This product has multiple variants. The options may be chosen on the product page
LECTROSONICS
Lectrosonics belt pack transmitter, dual AA battery, fixed antenna, wideband
This product has multiple variants. The options may be chosen on the product page
Lectrosonics belt pack transmitter / recorder, dual AA battery, incl. pouch, wideband
This product has multiple variants. The options may be chosen on the product page
LEUKOPLAST
Leukoplast is therefore a traction-resistant rayon fiber device that adheres very well to the skin. It is suitable for fixing all types of dressings and can be used to fix elastic bandages. It is easy to tear and apply.
Leukosilk Patch on Spool in cellulose acetate offers good initial and permanent adhesive power, painless removal and high tensile strength. It is also resectable with the hands.
AMBIENT
A Do-It-Yourself Upgrade Kit that allows all owners of a QP5 to benefit from this engineering masterpiece.
MOLNYLICKE
Mepitac® is indicated on patients with fragile and sensitive skin for the attachment of various medical devices, such as drains, tubes, probes, electrodes, IV cannulas and dressings. Thanks to Safetac® technology, Mepitac is specifically designed to minimize pain and trauma during its application and removal. It is indicated for neonates, dialysis patients and all those who require repeated applications of the fixing patch in the same area.
This product has multiple variants. The options may be chosen on the product page
Audio cables
MicroDot Extension Cable, 2.2 mm black
This product has multiple variants. The options may be chosen on the product page
RADIUS WINDSHIELDS
The Mini-ALTO & RAD-2 Kit is a compact, versatile windshield and shock-mounting system featuring an award-winning RAD shock mount, a quick-release magnetic pod windshield, and a removable fur cover for fast, exceptional wind and handling noise isolation on location.
This product has multiple variants. The options may be chosen on the product page
RADIUS WINDSHIELDS
The Mini-ALTO Windshield Add-On Kit transforms any existing RAD-1, RAD-2, or RAD-3 shock mount into a complete windshield system, featuring an ultra-lightweight magnetic pod, a Smiley Face Adaptor, a removable fur cover, and a magnetic stowage holder with carabiner clip.
This product has multiple variants. The options may be chosen on the product page
RADIUS WINDSHIELDS
Replacement fur windcovers for the Mini-ALTO
This product has multiple variants. The options may be chosen on the product page
RADIUS WINDSHIELDS
You can get Replacement or Add-On Pods to attached to existing kits for creating additional sizes of Mini-ALTO sized windshields
This product has multiple variants. The options may be chosen on the product page
RADIUS WINDSHIELDS
The smiley face adaptor can be added to any RAD-1, RAD-2 or RAD-3 mount to allow the option for converting the mount into a Mini-ALTO windshield. The adaptor is removable and can also be used pointing in either direction on top of a RAD shock mount.
Boom pole accessories
A convenient magnetic stowage holder with a carabiner clip that keeps your Mini-ALTO windshield pods together and accessible on your harness, cart, or bag when using the microphone without the full blimp.
RYCOTE
The lightest, smallest, fastest and most advanced windshield kit
OISPHOOT
OISPHOOT Boom Uperator compact and lightweight support system for taking the weight off your shoulder whilst booming
OISPHOOT
OISPHOOT CupRig cup holder microphone mount, 3/8''
OISPHOOT
OISPHOOT DuoRig cup holder microphone mount, 2x 3/8''
Boom pole accessories
Free your hand with The new ORCA OR-17 Magnetic boompole holder. How many times have you worked outdoor without having a place to safely or securely store your boom?
Hardcase
Orca Capsules and Accessories Pouch - To carry and protect your capsules and other small audio accessories
Bag accessories
The Orca OR-36 Environmental Covers were designed to protect Orca audio mixer bags, From dust and rain during transport. The cover is durable, easy to use and very lightweight. Ideal for keeping the elements and accidental spills on your gear.
The ORCA Small Wireless Pouch OR-38 was designed to hold the new “Lectrosonics-LR” system. It can be easily attached to any ORCA Audio Mixer Bag with our secure 180-degree locking system (Except the mini sound bags OR-28 & OR-280)
Bag accessories
Orca double wireless pouch, holds 2 receivers
Orca OR-48 ORCART audio accessories bag with built-in trolley
Boom pole accessories
Orca OR-83H rectangular, horizontal or vertical water / sand bag
This product has multiple variants. The options may be chosen on the product page
Bag accessories
The Orca Bags OR-156 Paddy ARC is designed to assist Field Sound Operators on long days of recording
The OR-16 comes with the Orca Bags aluminum trolley system, backpack system, and internal honeycomb frame, providing maximum protection for the gear inside
Transparent Accessories Pouch kit was design to help and organize the user’s accessories inside the bag with maximum visibility.
The Orca audio Organizer pouch can be used to securely store microphones, connectors, cables, CF cards and more. Each of the 5 pouches has a zipper. The two top pouches can be disconnected from the main pouch holder if needed. The main hook can be used to hang the pouch conveniently from your Orcart = OR-48. The pouch is well padded to protect the equipment on the inside. Lightweight and easy to use.
Mixer bags & backpack
Orca audio mixer / recorder bag, for Zoom F6
Mixer bags & backpack
The Orca OR-27 Small Audio Mixer Bag is one of Orca’s smallest audio mixer bags. It can hold the Zoom F4, Zaxcom Max, Tascam DR-701D, and similarly sized mixers.
Mixer bags & backpack
For Mixpre 3,6,3M/6M Tascam DR-70D, Tascam 701D,& Similar Size Mixers with up to 2 wireless systems
Mixer bags & backpack
The Orca OR-272 Low Profile Mixer Bag is part of Orca’s low profile audio mixer bag collection (OR-268, 270, and 272). The bag was designed to hold, protect, and transport small mixers such as the Zoom F4/F8n, the Zaxcom Nova, the Sound Devices MixPre-10 or similarly sized mixers, together with the MX-LMount battery sled. The OR-272 is ideal for a simple multi-channel recording.