The TRACK E Timecode Audio Recorder can easily fit in your pocket for recording on the go. This allows mobile operation for example as a recorder for a clip-on microphone eliminating the need for a radio-link. This means that the TRACK E will work in environments where regular wireless transmitter fail.
Controllable through the Setup App for iOS or Android, it seamless integrates into the Tentacle Sync eco system. The app lets you synchronize timecode and operate as many Tentacle devices as you need via Bluetooth. You can monitor audio wirelessly and will be notified immediately by the app if something doesn’t go as planned. For even more convenience, you can sync, start and stop your TRACK E devices from your Apple Watch.
TRACK E features 32-bit floating point technology for a significantly extended dynamic range. 32-bit floating point also means that no digital clipping will occur, making the TRACK E a versatile set-&-forget-device that will always deliver high quality audio. With the TRACK E users can treat audio in a similar way as photographers use the RAW camera photo format – all details can be adjusted in post production, significantly reducing the preparation time before you start shooting. In addition, regular 24-bit recording is supported as well.
The TRACK E uses an up to 64 GB microSD card for recording. An input limiter and a high-pass filter guarantee for pristine recording quality. A 3.5 mm locking connector offers a secure connection for your microphone. In addition to wireless sync, TRACK E features standard SMPTE timecode input/output so you can also connect to other timecode devices. A free license of Tentacle Sync Studio (Mac) is included with every TRACK E purchase.
FEATURES
- 32-bit Float Recording / 24-bit Recording
- Control, Sync & Record up to Hundreds of Devices via Bluetooth® within Seconds
- Wireless Audio Monitoring via Bluetooth®
- Wireless Timecode Sync via Bluetooth®
- Jam-Sync via Cable
- Timecode In/Out
- Push Notifications about Critical Battery States, Recording Errors and Low Remaining Recording Time
- Minimum Battery Runtime 10 hours
- Tentacle Sync Studio Software License included (macOS)
- Two Year Limited Warranty
- Designed and Manufactured in Germany
| Recording | Number of Tracks | 1 |
| Sampling Rate | 48 kHz | |
| Recording Bit-Depth | 32-bit Float / 24-bit | |
| Recording File Formats | WAV (BWF) | |
| Recording Time |
30 hrs (24-bit) / 23 hrs (32-bit Float) with 16 GB Card
|
|
| Storage Media | microSDHC Card up to 64 GB (Class 10) | |
| Signal Processing | Low Cut Filter, Limiter (24-bit only) | |
| Connectivity | Microphone Input | 3.5 mm Jack (screw lock) |
| Mic Plug-In Power | 5 V | |
| Headphone Output | 3.5 mm Jack | |
| USB Connection | USB-C (USB 2.0) | |
| USB Modes |
Charging, Card Reader, Firmware Update
|
|
| Performance | Frequency Response | 20 Hz – 20 kHz |
| Gain Range | +6 to +46 dB | |
| Dynamic Range | 110 dB typ | |
| THD+N | ≤ -85 dB (0,05%) | |
| Control & Sync | Bluetooth® | 5.2 Low Energy |
| Remote Control | Tentacle Setup App (iOS/Android) | |
| Audio Monitoring |
Wireless via Bluetooth® (Tentacle Setup App)
|
|
| Control |
Push Notifications via Bluetooth® (Tentacle Setup App)
|
|
| Synchronization |
Via Bluetooth® (Tentacle Setup App) or Jam-Sync via Cable
|
|
| Timecode Input | LTC via Mic In | |
| Timecode Output | LTC via Headphone Out | |
| Frame Rates |
SMPTE 12M / 23.98, 24, 25, 29.97, 29.97DF, 30
|
|
| Power | Power Source |
Built-in rechargeable Lithium Polymer Battery
|
| Battery Capacity | 900 mAh | |
| Battery Operation Time | min. 10 hours | |
| Battery Charging Time | max. 2 hours | |
| Hardware | Mounting |
Belt Clip (removable) – Black Powder-Coated Stainless Steel
|
| Weight | 58 g / 2.1 oz | |
| Dimensions | 47 x 68 x 19 mm / 1.85″ x 2.67″ x 0.74″ |

















